GM DTE Series:
Newatlas GM DTE series is formulated with high quality base oils and a super-stabilized additive system that neutralizes the formation of corrosive materials. They are designed to work with systems operating under severe conditions where high levels of antiwear and film strength protection are needed, yet they are formulated to work where non-antiwear hydraulic oils are generally recommended.

Newatlas GM DTE series is formulated from high quality base oil in conjunction with special additives for oxidation, rust, wear and anti-foam, also this oil has high viscosity index which be suitable for high temperature degrees.

Iso Grade 22 32 46 68 100
 DENSITY 15 °C, GR/ML 0.8800 0.8800 0.8900 0.8900 0.9000
 VISCOSITY 40 °C, CST 19.8-24.2 28.8-35.2 41.4-50.6 61.2-74.8 90-110
Viscosity Index (Minimum from tables) 125 125 125 125 125
Flash Point, COC, deg C (Minimum) 150 165 170 180 190
Sulfated ashes 0.4 0.4 0.4 0.4 0.4
Cupper strip corrosion 1 1 1 1 1
* Data given above are typical properties and may vary slightly.
Application :
  • Use in hydraulic system which require high VI and also use in lubricating the gear box.
Avoid prolonged contact skin. In case of any contact, Wash thoroughly after contact with plenty of water and soap. If this material is swallowed, the persone who swallowed must be vomited and get medical attention immediately. In case of contact with eyes, Eyes must be washed with plenty of water, Necessary safety precautions must be taken according to the property of the product.
Copyright © 2008 - 2011 NEW ATLAS Co. All Rights Reserved.